Nursing call system

 

1, with call function, nurses can get patient call information early so as to respond in time.

 

2. The number of beds can be displayed in many places, so that the nurses on patrol can get information from different angles to reduce running back and forth.

 

3. Set up a response extension in the corridor, duty room, treatment room and other places where nurses often appear, so that nurses can get in touch with patients in time.

 

4. Bedside extension can be set as "open and close" or "only open and close" mode to meet the different needs of different wards.

 

5. It has a telephone communication interface, which can transfer the external telephone to the patient's bed through the call system, so as to facilitate the patient and serve the patient.

 

Introduction of system unit

 

1. health care intercom host (type FS-2000)

 

The host is designed to be intelligent, superior in performance and powerful in function, and can call in both directions and duplex between the host and the extension. The host has many functions such as special care, no interruption call, hands-free call, broadcasting and so on. The main engine case is a desktop structure, easy to operate, 60/80 bed number indicator lights concentrated on the main board, how many bed number calls at the same time the lamp shows a number of call bed numbers; and equipped with two LED high brightness digital tube, digital order display call bed numbers, the overall display at a glance. The answer and call can be connected by pressing one key. The host and extension talk loudly, clearly and without noise.

 

Two way call: the host can call the extension and the extension can also call the host.

 

Full-duplex intercom: no need to change between the delivery and reception, pick up the microphone, both sides can talk, as convenient as a telephone call;

 

Uninterrupted Calling Function: When the host is in the answering extension and there are other extension calling hosts, the host can receive a new call signal and display it without interrupting the response.

 

Special Care Priority Function: The host computer can set up multiple special care priority numbers according to the needs of the nursing staff. When multiple numbers are called simultaneously, special care priority has the function of priority to snatch the line.

 

The host and extension can be reset.

 

Short circuit alarm: when the line is short circuited, the host will display alarm and accompanied by alarm.

 

The host can call each bed and talkback separately.

 

Call signal: A. ordinary call: intermittent sound of "one second, pause 3 seconds";

 

B. emergency call: "0.5 seconds, 0.5 seconds pause".

 

If you install more than one broadcast extension in each room, the multicast function can be realized.

 

A list of patients with digital display can be selected.

 

The host can be equipped with cordless phone, which is more convenient to use.

 

The host computer is equipped with a computer serial interface, which can be connected with the computer. It can also be equipped with data acquisition and analysis software to record the time and location of the call signal and the time of the nurse's response.

 

The toilet can be equipped with emergency call extension.

 

Specifications: 300*210*70MM

 

 

 

Extension 2.FS-2000-FA/FM (with extended call rope)

 

With the host computer, the extension panel is equipped with a call and call indicator. The patient presses the call button, the extension calls the red indicator light on, and the host alarms by sound and light, displaying the call bed number. When the host is off hook, the extension calls the green indicator light, and then it can communicate with the host duplex. The extension panel is also provided with a reset button, which can be reset at the extension to cancel the extension call by pressing the reset button.

 

1) installed on the bedside treatment belt, beautiful and generous.

 

2) use touch button.

 

3) equipped with call and call indicator, acousto-optic display at the same time.

 

4) equipped with loudspeaker and microphone. ,

 

FA installation extension: Specification 115*90*30MM medical equipment with opening 87*68MM

 

FM open loading extension: the specification 115*75*17MM is installed on the bedside wall of the hospital bed or on the equipment belt.

 

3. corridor digital display FS-2000-X

 

 

 

Hanging above the corridor, the number of the calling bed can be displayed digitally synchronously with the paging host computer, so that the nurses can know the number of the calling bed in time when they are on patrol, and they can go to the ward in time for nursing. Four-bit, double-sided red LED display, usually display time, when there is a call to show the call bed number; when the bed call, there is automatic memory display function. The inner frame is made of high quality aluminum alloy paint and pressed outside the stainless steel frame. The digital tube is super high brightness digital tube, with high brightness and clear distance.

 

Specifications: 595*200*30MM suggests installing the ward corridor in the middle suction ceiling installation.

 

4. call display door light FS-2000-M (optional)

 

Fixed to the front of the ward door, when a patient calls, the door light of the room lights up, indicating that the room has a patient call, easy for medical staff to find. The lamp shell lamp and lamp holder are made of high quality ABS engineering plastic injection molding, beautiful and generous appearance, and the lamp shell is clamped and assembled conveniently. Ultra-high brightness LED light-emitting tube is used in the lamp, which is higher brightness, lower voltage, less power consumption and longer life than ordinary incandescent bulb.

 

Specification: 147 * 86 * 30MM is installed on the top of the entrance door of the ward, and the standard 120 boxes or 86 boxes can be embedded in the center. It can also be packed on the wall of the door.